Linux version 2.4.19-preempt (root@psuedomode) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Sat Aug 3 04:45:06 EDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable) BIOS-e820: 0000000027ff0000 - 0000000027ff3000 (ACPI NVS) BIOS-e820: 0000000027ff3000 - 0000000028000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 639MB LOWMEM available. Advanced speculative caching feature not present On node 0 totalpages: 163824 zone(0): 4096 pages. zone(1): 159728 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=Linux ro root=301 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1133.414 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2260.99 BogoMIPS Memory: 646176k/655296k available (960k kernel code, 8736k reserved, 237k data, 236k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 CPU: AMD Athlon(tm) processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1133.4539 MHz. ..... host bus clock speed is 266.6950 MHz. cpu: 0, clocks: 2666950, slice: 1333475 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09 Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:07.0 Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:DMA PDC20262: IDE controller on PCI bus 00 dev 78 PCI: Found IRQ 11 for device 00:0f.0 PCI: Sharing IRQ 11 with 00:0d.0 PCI: Sharing IRQ 11 with 00:0d.1 PDC20262: chipset revision 1 PDC20262: not 100% native mode: will probe irqs later PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:DMA, hdh:pio hda: C/H/S=47885/16/255 from BIOS ignored hda: WDC WD1000BB-00CAA0, ATA DISK drive hdd: CREATIVE CD-RW RW8438E, ATAPI CD/DVD-ROM drive hde: Maxtor 52049U4, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xd800-0xd807,0xdc02 on irq 11 hda: 195371568 sectors (100030 MB) w/2048KiB Cache, CHS=193821/16/63, UDMA(100) hde: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(66) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 > /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 564M agpgart: Detected Via Apollo Pro KT133 chipset agpgart: AGP aperture is 64M @ 0xe0000000 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 236k freed Adding Swap: 512024k swap-space (priority -1) Adding Swap: 487832k swap-space (priority -2) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 10 for device 00:07.2 PCI: Sharing IRQ 10 with 00:07.3 PCI: Sharing IRQ 10 with 00:08.0 uhci.c: USB UHCI at I/O 0xc400, IRQ 10 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 10 for device 00:07.3 PCI: Sharing IRQ 10 with 00:07.2 PCI: Sharing IRQ 10 with 00:08.0 uhci.c: USB UHCI at I/O 0xc800, IRQ 10 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice Linux Tulip driver version 0.9.15-pre11 (May 11, 2002) PCI: Found IRQ 10 for device 00:08.0 PCI: Sharing IRQ 10 with 00:07.2 PCI: Sharing IRQ 10 with 00:07.3 eth0: ADMtek Comet rev 17 at 0xe88c3000, 00:04:5A:67:55:EC, IRQ 10. loop: loaded (max 8 devices) hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices i2c-core.o: i2c core module i2c-proc.o version 2.6.1 (20010825) i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-isa.o version 2.6.4 (20020719) i2c-dev.o: Registered 'ISA main adapter' as minor 0 i2c-core.o: adapter ISA main adapter registered as adapter 0. i2c-isa.o: ISA bus access for i2c modules initialized. via686a.o version 2.6.4 (20020719) i2c-core.o: driver VIA 686A registered. i2c-core.o: client [Via 686A Integrated Sensors] registered to adapter [ISA main adapter](pos. 0). Linux video capture interface: v1.00 i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.91 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133] bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:0d.0 PCI: Sharing IRQ 11 with 00:0d.1 PCI: Sharing IRQ 11 with 00:0f.0 bttv0: Bt878 (rev 2) at 00:0d.0, irq: 11, latency: 32, memory: 0xea020000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] i2c-dev.o: Registered 'bt848 #0' as minor 1 i2c-core.o: adapter bt848 #0 registered as adapter 1. bttv0: Hauppauge eeprom: model=61381, tuner=Philips FM1236 (2), radio=yes bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp34xx: init: chip=MSP3430G-A1, has NICAM support msp3410: daemon started bttv0: i2c attach [client=MSP3430G-A1,ok] i2c-core.o: client [MSP3430G-A1] registered to adapter [bt848 #0](pos. 0). bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: ignoring ISA main adapter i2c adapter [id=0x50000] tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 bttv0: i2c attach [client=Philips NTSC,ok] i2c-core.o: client [Philips NTSC] registered to adapter [bt848 #0](pos. 1). bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 spurious 8259A interrupt: IRQ7. hub.c: USB new device connect on bus1/2, assigned device number 2 input0,hiddev0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb1:2.0 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. hda: DMA disabled hde: DMA disabled PCI: Found IRQ 5 for device 00:09.0 hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hde: drive_cmd: error=0x04 { DriveStatusError } hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hde: drive_cmd: error=0x04 { DriveStatusError } hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hde: drive_cmd: error=0x04 { DriveStatusError } hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hde: drive_cmd: error=0x04 { DriveStatusError } bttv0: PLL: 28636363 => 35468950 ... ok bttv0: PLL: switching off hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hde: drive_cmd: error=0x04 { DriveStatusError } hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hde: drive_cmd: error=0x04 { DriveStatusError }